14PV163 Repair Tips

Search: 14PV163

Results 9

Make	Model Ch.	Symptom	Problem Solution
Philips	14PV163	Reverts to standby from switch on via TV or Video	No 5v rail because FET MTP3055 o/c. BUZ71 will do nicely
Philips	14PV163/05H	Codenumber information - new software	A new software version (PTCP2-7) is available for the control uP (IC 7801). Service codenumber is 4822 209 15271. This new version is only used in the following sets: 14PV263/01, 14PV162/01, 14PV162/05, 14PV162/07, 14PV163/05, 14PV163/05H, 14PV263/01
Philips	14PV163/05	Reverts to st/by aft a few mins	Caused by problem triggering prot cct. Usually D6513 BAV21 flyback boost cap in FOP stage - use BYD33J in lieu
Philips	14PV163/05	Line pairing on off air pics - ok on pback	Dist at vid o/p from if - tuner faulty type U944C-IEC
Philips	14PV163/05	Codenumber information - new software	A new software version (PTCP2-7) is available for the control uP (IC 7801). Service codenumber is 4822 209 15271. This new version is only used in the following sets: 14PV263/01, 14PV162/01, 14PV162/05, 14PV162/07, 14PV163/05, 14PV163/05H, 14PV263/01
Philips	14PV163	Spare part information	Sets produced from week 9608 until 9647. Motor holder with reverse prism included: In sets produced before week 9647 the reverse prism is a fixed part of the chassis and not available as a spare part. From week 9647 onwards a motor holder (pos.40) with
Philips	14PV163	Reverts to st/by at sw on	Sw tr7352 in middle of pcb
Philips	14PV163	Key set	The key set assy has been codified for all B-range TVCR's. This will allow to change the keys without having to change the complete frame. Servicenr. 4822 410 11075 - Key set for: 14PV263/01/02/08/13 - 14PV264/39 - 14PV163/05 - 14PV172/01/05/08/13/39 -
Philips	14PV163	Codenumber information	The codenumber for the spacer between on/off switch and the knob (pos 3) is 4822 402 10702.